Wansview NCM629W Bedienungsanleitung PDF herunterladen (Seite 20)

http://www.wansview.com

3.3.2. Motion Detection Setting

Click SYSTEM SET->>ALARM->>Motion Detection to access setting interface as figure 18,

you can set up detect window here, tick a window, the corresponding green frame of motion

detection window is displayed, you can tick four windows maximum for motion detection area

as below.

Figure 18

Please click “apply” after finishing the settings, and motion detection takes effect. The

higher value, the higher sensitivity. The camera will trigger corresponding alarm when

any change occurs in the detection area.

3.3.3. Alarm mode setting

After camera detects any change, it will alarm as several mode, example of figure 18.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

Keine Kommentare

Wansview NCM629W Bedienungsanleitung Seite 20